Электрические изоляторы загородки
Изолятор для когтей из ПП INS609B 19.7g Изоляторы для электрических ограждений из деревянных столбов для полипровода 6 мм
Product Overview The INS609B is a compact wood post claw insulator for conductors up to 6 mm. Made from tough PP/PE, it grips wire, poly wire and poly rope without letting them creep, and its light 19.7 g body suits fences that are strung, stripped and re-strung through the year. The slim claw ...
Изолятор для столба INS608B 30.2г для электроизгороди из полипропиленового провода 9мм
Product Overview The INS608B is a wood post claw insulator sized for thicker conductors up to 9 mm. The claw wraps the wire so it cannot slip down the post, while the impact-resistant PE body takes the knocks of daily farm use. At 30.2 g it adds little load to timber posts even over long runs. Key ...
Изолятор кольцевой INS460B 45,3г M6X22см для электроизгороди с длинным винтовым штырем
Product Overview The INS460B long thread offset ring insulator holds a conductor well clear of the post with a total length of 275 mm. A 5.8 mm galvanized steel easy screw carries a 75 mm thread and the plastic head is 60 mm long, so the ring stays rigid under tension. Wire, poly wire and poly rope ...
Изолятор с длинной нитью INS058B 150 мм 40 г. Электрические изоляторы для ограждений с 55 мм винтовой стойкой
Product Overview The INS058B long thread ring insulator gives a conductor a 150 mm offset from the post. Its 5.8 mm galvanized steel easy screw has a 55 mm thread, the plastic head is 50 mm long, and the 40 g PE body is impact resistant. Wire, poly wire and poly rope run free through the ring up to ...
Устойчивый к ударам винтовой офсетный изолятор INS015B 68g Электрические изоляторы ограждения для 25 мм винтовой стойки
Product Overview The INS015B is an impact resistant screw-in offset insulator that lifts wire, poly wire and rope clear of the post. A 6 mm galvanized steel screw with a shorter 25 mm thread holds the arm 220 mm out, and the 68 g PE body stays firm under tension. It is the shallow-thread version for ...
Винтовой угловой изолятор INS082B 62,5 г для электроизгороди, для полиленты 25 мм, резьба 55 мм
Product Overview The INS082B stands wire, poly wire and rope off a timber post and is built to carry wider poly tape as well. Its 6 mm galvanized steel screw has a 55 mm thread and holds the arm 220 mm out from the post, while the 62.5 g PE head takes tape around 20 to 25 mm and conductors up to 4 ...
Угловой изолятор INS560B 147g Электрические изоляторы ограждений из деревянного столба для 40 мм ленты с двойной боковой клипом
Product Overview Built for timber post corners, the INS560B steers a broad fencing tape around the turn using two clips that keep it square. A 304 stainless fastener anchors it to the post, and the 147 g shell of HDPE and galvanized steel is made for long-term outdoor lines. The paired clips stop ...
Изолятор угловой ленты из дерева INS561B 147g Электрические изоляторы ограждения для 40 мм ленты нержавеющей струны
Product Overview A tape corner fitting for timber posts, the INS561B takes one run of fencing tape and holds it against the post. The 304 stainless bolt does the fixing while a lone side clip keeps the tape level as it departs. Its 147 g shell mixes HDPE with galvanized steel so it keeps holding ...
Изолятор от деформации с мелкими концами HDPE INS502B Изоляторы от желтого электрического забора для углового столба 5 мм проволоки
Product Overview The INS502*B is a small HDPE end strain insulator supplied in yellow for high visibility. It brings a 5 mm conductor through the fitting and holds wire, poly wire, poly rope and poly braid up to 6 mm, making it a compact anchor for the corner or end of a fence. The HDPE body is ...
